Power Supply: AC 110 V, 60 Hz
Primary Current: 2 – 15 A
Welding Current :50 – 800 A (The corresponding pulse time: 1 ms – 19 ms)
Charging Voltage: 4.2 – 36 V (Adjustable)
Charging Current :0 – 3 A (Adjustable)
Applicable Welding Thickness: 0.1 – 0.2 mm; For pure nickel strip: 0.1 – 0.15 mm
Electric leakage Switch Requirement :60 A or more than 60 A
Weight: 4.3 kg
Dimensions: 140 x 245 x 200 mm
1.788H-USB is based on mobile power assembly production, based on the original 788H research and development of products, for mobile power assembly after the test charge aging, test the mobile power supply circuit can work properly, the value of the charge current value.
2.Check whether the circuit board of the mobile power supply is equipped with a charging protection function.
3.788H-USB at the same time to adapt to mobile phones, Tablet PC battery maintenance after the test and aging test.
4.788H-USB has three standard 5V USB output charging port, the maximum output current of 3A, with 2-3A current smart phones, tablet PCs, mobile power and other charging test is very appropriate.
1.Spot welding, lithium battery testing, charging three functions.
2.Microcomputer control 199 (99 * 1; 99 * 2) precision welding parameter setting.
3.Ultra-fast welding selection mode with single pulse and double pulse.
4.Both the knob-type quick-setting pulse group (16-pulse) high-current slow welding mode, suitable for thicker nickelplate welding.
5.With 4.2V-36V 3A adjustable constant voltage constant current charging device to meet most of the lithium battery after welding charge or test.
6.Unique battery tester can test the lithium battery charging current.
7.With pedal welding trigger switch, improve welding quality.
8.Professional welding of the needle pressure regulator device.
1 x 788H-USB Spot Welder
2 x Fuse tube
1 x Foot Switch
1 x Hex Wrench
2 x Welding Pin
2 x Charging wire
1 x Fixture for 6 batteries
100 x Nickel sample
The requirement of Earth Leakage Circuit Breaker is higher than 40A, it is not recommended to use at home.
The machine cannot weld copper or aluminum.
There are no inquiries yet.